This high-performance grease is formulated to withstand extreme pressure in fifth wheels and heavy-duty equipment, and is unaffected by weather conditions. It adheres firmly to metal surfaces regardless of weather conditions.
Exceptional water resistance and superior traction in all weather conditions.
Resistance to severe metal-to-metal pressure thanks to the ultra-hard film's strength.
Significantly longer lubrication intervals compared to conventional greases. It contains unique load-bearing, anti-wear, and anti-friction additives that protect against high stress and wear in open-gear systems. It provides maximum resistance to the sliding and scraping motions of gear teeth.
Unlike ordinary greases, it does not thin out or run at even slight increases in temperature. By maintaining its initial soft texture, it keeps dust and moisture out of the system.
The ability to “adhere” to metal surfaces for much longer than traditional greases.
Special additives that prevent metal-to-metal contact and protect against severe wear.
High performance in outdoor environments thanks to its exceptional water resistance.
Base Oil Viscosity (40 °C): 460 cst. 
Fifth wheels and heavy-duty machinery hitches.
Cranes and mobile crane systems.
Logging tractors and forestry equipment.
Rear pulleys, cable guides, and open-type moving systems.
Extreme synthetic grease; used in applications involving cement, marine equipment, moving mortars, and machinery operating under high and low temperatures.
The technical specifications of BOOM GREASE, based on laboratory test results, are listed below. All values were measured under standard test conditions.
| Analysis | Standard | Unit | Result |
|---|---|---|---|
| Color | – | – | Black |
| Appearance | – | – | Homogeneous |
| Thickener | – | – | Calcium Sulfonate Complex |
| Base Oil | – | – | Mineral |
| Base Oil Viscosity (cSt) at 40 °C | ASTM D445 | cSt | 460 |
| NLGI Grade | – | – | 2 |
| Penetration | ASTM D217 | mm/10 | 265 – 295 |
| Dropping Point | ASTM D2265 | °C | > 300 |
| Four Ball EP Test (10 sec / 1770 rpm) | ASTM D2596 | kg | ≥ 500 |
| Rust Test | ASTM D1743 | – | Pass |
Please fill in your details to access the TDS and SDS files.
Thank you! You can download the files below.
Contact 
Download TDS